and 3) the original impeller with splitter blades placed at the inlet. The splitter blades occupied 30% of the length of the main blades. These simulations were performed using the ANSYS-CFX software system, with a rotational speed of 1500 rpm and varying flow rates. The chosen turbulence model was the Shear Stress Transport (SST) model. The obtained results were utilized to generate impeller blade head curves and illustrate pressure distribution and streamline behavior within the impeller. It was observed that the inclusion of splitter blades resulted in a reduction of impeller blade head, particularly in the impeller with outlet splitters, where the reduction was more pronounced. The images and data used here are adapted from the work of: Henrique M. P. Rosa, Bruno S. Emerick in the article titled '[CFD simulation on centrifugal pump impeller with splitter blades]' published in the journal [evista Brasileira de Engenharia Agrícola e Ambiental - Agriambi]. The source of the these can be found at [Link to the Source: https://www.scielo.br/j/rbeaa/a/cdrMXXYtdmq4CmFGNJYqT7v/?lang=en#] . The images and data are licensed under CC BY 4.0 [License Link: https://creativecommons.org/licenses/by/4.0/]."