Simulation steps for axial fan


  • 25.jpg
  • 24.jpg
  • 0.jpg
  • 1.JPG
  • 2.JPG
  • 3..JPG
  • 3.JPG
  • 4.JPG
  • 5.JPG
  • 6.JPG
  • 7.JPG
  • 8.JPG
  • 9.JPG
  • 10.JPG
  • 11.JPG
  • 12.JPG
  • 13.JPG
  • 14.JPG
  • 15.JPG
  • 16.JPG
  • 17.JPG
  • 18..JPG
  • 19.jpg
  • 20.jpg
  • 21.jpg
  • 22.jpg
  • 23.jpg
  • 26.jpg
  • 27.jpg
  • 28.jpg
  • Simulation steps for Axial fan

Description:

Hi... let me to explain about my Simulation steps...I put all of my Simulation steps for numerical Analysis an axial fan... Also I put all of Contours... B.C. pressure inlet=10 Pa at inlet, turbulent intensity=5 % Hydraulic diameter=0.064 m at outlet, I use pressure-outlet as B.C. and put 0 p



Continued...

a and turbulent intensity=5 % and Hydraulic diameter=0.064 m I Set the backflow turbulence parameters for the flow outlet (pressure-outlet) to the same values used for pressure-inlet. Is it true? Please check all of my steps for simulation and all of contours and commenting... I am not sure my results of simulation are true or not... I do not know how to show the accuracy and validity of the results. I don't access to the experimental data or a good paper to show the accuracy and validity of the results. please help me...thank you...


Attachments:

File Name | To view or download these files please go to the project page
25.jpg
24.jpg
0.jpg
1.JPG
2.JPG
3..JPG
3.JPG
4.JPG
5.JPG
6.JPG
7.JPG
8.JPG
9.JPG
10.JPG
11.JPG
12.JPG
13.JPG
14.JPG
15.JPG
16.JPG
17.JPG
18..JPG
19.jpg
20.jpg
21.jpg
22.jpg
23.jpg
26.jpg
27.jpg
28.jpg