FFF4.jpg size: 0.387292 MB
FFF2.jpg size: 0.29675 MB
FFF5.jpg size: 0.244435 MB
large.jpg size: 0.221798 MB
valve CFD.wbpj size: 0.147225 MB
valve.ipt size: 0.209408 MB
valve.scdoc size: 0.1518 MB
CFD Analysis On Valve _Ansys Fluent
NoAI: This model, simulation, images, or project may not be utilized within datasets, during the developmental process, or as inputs for generative AI programs.
A valve is a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latin valva, the moving part of a door, in turn from volvere, to turn, roll. The simplest, and very ancient, valve is simply a freely hinged flap which drops to obstruct fluid (gas or liquid) flow in one direction, but is pushed open by flow in the opposite direction. This is called a check valve, as it prevents or "checks" the flow in one direction. Modern control valves may regulate pressure or flow downstream and operate on sophisticated automation systems. Valves have many uses, including controlling water for irrigation, industrial uses for controlling processes, residential uses such as on/off and pressure control to dish and clothes washers and taps in the home. Even aerosols have a tiny valve built in. Valves are also used in the military and transport sectors.
Related Projects
Responses
on September 10th, 2017
on September 15th, 2020
