Axial-Turbine-Simulation-Streamlines-Plots.jpg size: 1.649155 MB
Axial-Turbine-Simulation-Result-Files.rar size: 10.672497 MB
Axial-Turbine-Simulation-Pressure-Contour.jpg size: 0.059963 MB
Axial-Turbine-Simulation-Geometry.jpg size: 0.036529 MB
Axial-Turbine-Simulation-Velocity-Vectors.jpg size: 0.091313 MB
Axial-Turbine-Simulation-Velocity-Vectors-2.jpg size: 0.092164 MB
Axial-Turbine-Simulation-Result-Files.rar size: 10.672497 MB
Axial-Turbine-Simulation-Pressure-Contour.jpg size: 0.059963 MB
Axial-Turbine-Simulation-Geometry.jpg size: 0.036529 MB
Axial-Turbine-Simulation-Velocity-Vectors.jpg size: 0.091313 MB
Axial-Turbine-Simulation-Velocity-Vectors-2.jpg size: 0.092164 MB
Axial Turbine Simulation
Steady state CFD simulation of axial turbine using ANSYS CFX is performed. For turbulence shear stress transport model is used. Simulation result files are attached for download. Further credit: Christoph Scheit & Prof. Philipp Epple (https://fetchcfd.com/profile/philipp%20epple )
Related Projects
Responses
Hi Atif and thank you for your comment...let me to explain about my Simulation steps... I put all of my Simulation steps that you and all of members can check it...
Also I put all of Contours...
pressure inlet=10 Pa
at inlet, turbulent intensity=5 %
Hydraulic diameter=0.064 m
at outlet, I use pressure-outlet as B.C. and put 0 pa and turbulent intensity=5 %
and Hydraulic diameter=0.064 m
I Set the backflow turbulence parameters for the flow outlet (pressure-outlet) to the
same values used for pressure-inlet. Is it true?
Please check all of my steps for simulation and all of contours and commenting...
I am not sure my results of simulation are true or not...
I do not know how to show the accuracy and validity of the results. I don't access to the experimental data or a good paper to show the accuracy and validity of the results.
please help me...thank you...
on September 26th, 2017