24.jpg size: 0.049125 MB
0.jpg size: 0.144101 MB
1.JPG size: 0.035831 MB
2.JPG size: 0.015794 MB
3..JPG size: 0.034605 MB
3.JPG size: 0.063313 MB
4.JPG size: 0.047605 MB
5.JPG size: 0.075895 MB
6.JPG size: 0.055918 MB
7.JPG size: 0.046841 MB
8.JPG size: 0.04607 MB
9.JPG size: 0.036774 MB
10.JPG size: 0.09751 MB
11.JPG size: 0.118665 MB
12.JPG size: 0.023657 MB
13.JPG size: 0.066278 MB
14.JPG size: 0.036683 MB
15.JPG size: 0.025179 MB
16.JPG size: 0.039707 MB
17.JPG size: 0.044528 MB
18..JPG size: 0.128965 MB
19.jpg size: 0.052766 MB
20.jpg size: 0.053821 MB
21.jpg size: 0.051641 MB
22.jpg size: 0.048696 MB
23.jpg size: 0.051383 MB
26.jpg size: 0.216257 MB
27.jpg size: 0.162352 MB
28.jpg size: 0.176222 MB
Simulation steps for Axial fan
Hi... let me to explain about my Simulation steps...I put all of my Simulation steps for numerical Analysis an axial fan... Also I put all of Contours... B.C. pressure inlet=10 Pa at inlet, turbulent intensity=5 % Hydraulic diameter=0.064 m at outlet, I use pressure-outlet as B.C. and put 0 pa and turbulent intensity=5 % and Hydraulic diameter=0.064 m I Set the backflow turbulence parameters for the flow outlet (pressure-outlet) to the same values used for pressure-inlet. Is it true? Please check all of my steps for simulation and all of contours and commenting... I am not sure my results of simulation are true or not... I do not know how to show the accuracy and validity of the results. I don't access to the experimental data or a good paper to show the accuracy and validity of the results. please help me...thank you...
Related Projects
Responses
on September 26th, 2017
on September 26th, 2017
on September 26th, 2017